Here is shown how the F-22 Raptor from Freewing by MotionRC is converted to thrust vector control. The main parts can be printed in LW-PLA to be as light as possible and the others in standard PLA. The air flow is kept as efficient as necessary so that there is no loss of thrust. ... https://www.youtube.com/watch?v=94m47ATyaYM
You can buy and download the finished model here:
https://cults3d.com/en/3d-model/game/eurofighter-wingspan-1m-with-equipment-from-motionrc
This will be a model to 3d print.
Wingspan: 1m
Weight: about 4kg
Engines: 2x Freewing 70mm impellers
ECS: 2x 80A
Servos: Freewing Standard 9g
Battery: 7000mAh
Servos for landing gear: Freewing Standard 4.1mm
Material for printing: LW-PLA, PLA, PETG
...
https://www.youtube.com/watch?v=y1hgchZ35DA
You can download and build you own model here:
https://cults3d.com/en/3d-model/game/3d-printed-su-27-flankerwith-equipment-from-motionrc
This is a model to 3d print.
Wingspan: 1.062m
Weight: 4,2kg
Engines: 2x Freewing 70mm impellers
ECS: 2x 80A
Servos: Freewing Standard 9g
Battery: 7000mAh
Servos for landing gear: Freewing Standard 4.1mm and 5.1mm
Material for printing: LW-PLA, LW-PLA-HT, Carbon-PLA, Carbon-PETG or Carbon-Nylon
...
https://www.youtube.com/watch?v=G-JXM4rm_m8
This will be a model to 3d print.
Wingspan: 1m
Weight: about 4kg
Engines: 2x Freewing 70mm impellers
ECS: 2x 80A
Servos: Freewing Standard 9g
Battery: 7000mAh
Servos for landing gear: Freewing Standard 4.1mm
Material for printing: LW-PLA, PLA, PETG
Music:
Beyond - Patrick Patrikios
...
https://www.youtube.com/watch?v=Xbk6nZL8Svk
You can buy and download the finished model here:
https://cults3d.com/en/3d-model/game/eurofighter-wingspan-1m-with-equipment-from-motionrc
This will be a model to 3d print.
Wingspan: 1m
Weight: about 4kg
Engines: 2x Freewing 70mm impellers
ECS: 2x 80A
Servos: Freewing Standard 9g
Battery: 7000mAh
Servos for landing gear: Freewing Standard 4.1mm
Material for printing: LW-PLA, PLA, PETG
...
https://www.youtube.com/watch?v=lcxzFNyscoM
Pay and Download the mods cockpit and flaps (not landing gear)
https://cults3d.com/en/3d-model/game/freewing-me-262-cockpit-and-flaps
These parts are designed to fit the Me 262 by Freewing.
The content is the cockpit, including the pilot and the molds for the canopy and the flaps as arch flaps.
Because of the high level of detail, all parts of the cockpit and the pilot can only be printed using the SLA method or using the FDM method with a nozzle diameter of 0.2 mm using standard PLA.
The flaps can be printed using the FDM process with a nozzle diameter of 0.4 mm and LW-PLA.
In order to be able to manufacture the hood, the corresponding negative mold must first be printed out and then prepared accordingly in the GRP manufacturing process and then manufactured.
If desired, a hood for 3D printing is also part of the package.
For the glass for the hood, the deep-drawing mold has to be printed and ground and then deep-drawn with a 0.6mm PETG plate in the oven.
...
https://www.youtube.com/watch?v=JAH42mGpKOs
You can buy and download the finished model here:
https://cults3d.com/en/3d-model/game/eurofighter-wingspan-1m-with-equipment-from-motionrc
Modelldata:
Wingspan: 1m
Material for printing: LW-PLA and PLA or PETG
You can buy the equipment from MotionRC:
Engines: 2x 70mm impellers
ECS: 2x 80A
Servos: 10x Freewing Standard 9g
Battery: 6000 - 7000mAh 6S
Servos for landing gear: 3x Freewing Standard 4.1mm
A detailed list is in the guide.
Music is from Zakhar Valaha Music
https://www.youtube.com/watch?v=CJLTMV8UsEQ
...
https://www.youtube.com/watch?v=49m4RTl0-Jg
Flug meiner TA 152-C am Rande von Berlin. Das Model ist ein vollständig eigengebautes maßstabsgetreues Modell mit einer Spannweite von ca. 92cm, einem Abfluggewicht von 1000g und einer Flugzeit von 12min. Am Modell sind Nieten, Blechstöße und Wartungsklappen sehr detailreich dargestellt. Zum Cockpitausbau kommt noch ein originales ölgedämpftes Einziehfahrwerk, samt einziehbahrem Spornrad hinzu genauso wie Flaps, die die Mindestgeschwindigkeit um einiges herabsetzen. Hergestellt wurde es durch die Negativbauweise und ist im Sandwichbau (Honigwabe) aufgebaut.
...
https://www.youtube.com/watch?v=JIw7A6E0BaQ
This will be a model to 3d print.
Wingspan: 1.06m
Weight: about 4kg
Engines: 2x Freewing 70mm impellers
ECS: 2x 80A
Servos: Freewing Standard 9g
Battery: 7000mAh
Servos for landing gear: Freewing Standard 4.1mm and 5.1mm
Material for printing: LW-PLA, LW-PLA-HT, Carbon-PLA, Carbon-PETG
Music:
Zakhar Valaha Music - price-of-freedom
...
https://www.youtube.com/watch?v=RVt8Kwpv6zo