Greetings everyone!
In this video you can see how I made a belt grinder from an old 370 watt three-phase electric motor. Its nominal speed is 2740 rpm.
The design is designed for tape size 50*915 mm (2*36 inches).
The private pulley with a diameter of 120 mm is glued from plywood and turned on a lathe.
And two rollers, one of which is barrel-shaped, are made of kaprolon. Their diameter is 60 mm, and the width is 55 m. Number 203 (CX company) put the bearings there.
The base plate, i.e. the frame, is 8mm (1/3 inch) thick machine laser cut. The lever is also cut from 8mm steel.
Side table size 200*120 mm (steel 6 mm).
The whole mechanism is driven by a three-phase motor of 2750 rpm with a power of 370 Watts. I connected this motor to a single-phase 220 volt network through a 700 watt frequency converter that I previously bought in China.
The whole structure turned out to be strong and compact.
The tape, during the operation of the machine, stands in place as if dug in.
Watch the video to the end, express your opinion.
Thank you for your attention, good luck!
TikTok: https://tiktok.com/@redneq5
Instagram: @madeingarage1
Facebook: https://facebook.com/groups/1113008455830620/
Email: migdiy2020@gmail.com
...
https://www.youtube.com/watch?v=DPSj_hwwKVE
Band saw with your own hands. The structure of the frame, the mechanism for tensioning the cutting disc and tilting the driven wheel.
How to make a band saw. Plywood or aluminum? A good idea for a homemade machine in a home workshop.
Part 1: https://youtu.be/0t7xWiSm6sM
Patreon: https://patreon.com/madeingarage
Instagram: @madeingarage1
Facebook: https://facebook.com/groups/1113008455830620/
Email: migdiy2020@gmail.com
...
https://www.youtube.com/watch?v=KyjOKmy5Ixw
Modernization of a Chinese drilling machine, a bad experience. Fashion for Chinese drill. What to do if there is no rigidity. Increasing the rigidity of the drilling machine. Noise reduction from drilling machine operation. Improvement of household drilling machine. How to increase the rigidity of the machine. Not NS-12, 2m112
Contact me: migdiy2020@gmail.com
...
https://www.youtube.com/watch?v=dk3-kskj6do
Powerful attachment for angle grinders
Hello, people!
You have never seen anything like this before!
This time I made a powerful cutter out of an angle grinder.
The design is working and ready for use and copying.
It fits an angle grinder with a 125 mm blade.
Let me know what you think about it.
Thank you for your attention!
...
https://www.youtube.com/watch?v=f0iR9kyYVbQ
Hello Friends!
In this video I will do a trimmer bike. You will see how to do it step by step.
Bicycle with engine from trimmer or chainsaws.
Thank you!
Good luck!
Contact me: migdiy2020@gmail.com
...
https://www.youtube.com/watch?v=3i7IHb5ESHw
How to make a bicycle. Self-made bicycle frame. Do-it-yourself bicycle, step-by-step instructions. Welding a bicycle frame with ordinary electrodes. What does it take to make your own bike?
#bicycle #bike #homemade
...
https://www.youtube.com/watch?v=gHkrUoa2RJE
Friends, hello everyone!
Finally, after nine months of infrequent work, I'm done! Namely - a very cool grinder with a cup with a diamond coating. To do this, I used an electric motor from an old washing machine, which is more than 50 years old. The design turned out exactly as I wanted, although there were some technological flaws. Now carbide cutters for a lathe can be sharpened without any effort.
Thank you!
Like, comment and subscribe to the channel!
Good luck!
Contact me: migdiy2020@gmail.com
...
https://www.youtube.com/watch?v=LQ-e7qdb8WQ