First time driving around with my new plane. 7 kg all up weight is very light for this size. Acceleration is great.
...
https://www.youtube.com/watch?v=yzgsMZbmK0s
Get the STL files here: https://cults3d.com/en/various/mkultra-3d-printable-1-10-4wd-buggy
The car features:
-Uses easy to find belts from Schumacher K1 buggy.
-Can use CV axles from multiple brands.
-Wrap around body is held on without clips or velcro and keeps dirt out.
-Super precise steering thanks to ball bearings in all hinges.
-Small turning radius.
-Radial shock positions ensure minimal height change with shock adjustment.
-Printable high strength gear or ball diff option.
-Printable 48dp pinion and spur gears.
-Printable slipper clutch option.
-Sway bar option front and rear.
-Two body styles to choose from.
-Many adjustment possibilities.
-Designed to comply with ROAR regulations.
-Easy to use shorty battery mount without clips.
...
https://www.youtube.com/watch?v=4D7m5fsxQ9I
Maiden flight with my new simple Hercules design. This has flaps and better printability and easier assembly than the old version. The gunship is printed from PCTG which is a material that can handle high temperatures, which will be needed with the flat black finish in sunlight. I also printed a white L-100 version from LW-PLA seen in the opening photo.
It flew fine despite the relatively high weight of 1450 g and flaps worked well, but added a lot of up elevator that I need to compensate for with a mix.
The free 3D printable files are available from here: https://cults3d.com/en/3d-model/various/1-32-scale-c-130-hercules-rc-model-for-vase-mode-printing
...
https://www.youtube.com/watch?v=IFvVT9St5As
Finally got my little F-35 flying well. I designed abigger 75 mm EDF for it and it's a perfect match. Spends half the battery in 3 minutes so descent duration as well as performance now.
...
https://www.youtube.com/watch?v=EBGJEyr9wqg
First flight with my Dynam Catalina. Not an amazing flyer in these windy conditions. No wind at ground leel but a lot above tree level. Flies like any other foamie. The rudder did nothing on the ground.
...
https://www.youtube.com/watch?v=DNK4l9xcmlA
A short clip showing how I install and remove the body on my 3D printed MKUltra buggy.
Download and print your own here:
https://cults3d.com/en/various/mkultra-3d-printable-1-10-4wd-buggy
...
https://www.youtube.com/watch?v=kis6NHcgPJY