Blade and drill bit info links https://www.bearwood.com/scroll-saw-blades.html https://www.bearwood.com/drill-bits.html https://mikesworkshop.com/collections/blades/products/scroll-reverse Here are links to the book and the tools that I have purchased. Link to book: https://amzn.to/48D0NxB Flex pad sander and discs: https://amzn.to/3S7sadV Sanding sleeves for inflatable sander: https://amzn.to/4aLRsFo Inflatable sander: https://amzn.to/3S3FmQT Affiliate links to the things I use in the lay out of my spinners compass (not the same as mine as it is not available anymore, but I like this one) https://amzn.to/3LVcYNl 30 60 90 ruler https://amzn.to/46JFyct 45 45 90 ruler https://amzn.to/3PStOxq swivel hooks https://amzn.to/3Qduf77 https://amzn.to/3FRIAQE Some of my favorite pattern books classic fretwork patterns https://amzn.to/3PT7fsJ custom boxes https://amzn.to/3ROJt3B gear clocks https://amzn.to/45rXxDl gizmos and gadgets https://amzn.to/3FnoBJ5 scroll saw box patterns https://amzn.to/44sYQTt This week I have been behind on everything and mainly video making and woodworking. With a holiday and heavy mowing to do due to heavy rains this spring and lawn mower problems I have been playing catchup for days. I started this box last week to replace the last one I sold at the consignment shop so I jumped in the middle of the project to make a video with it. Again, I am making the blank from various scraps of 3/4 in pieces. Every time I do one of these it is different. I used pegs to attach the lid, I make most of them that way but sometimes use a magnet in conjuction with a swivel peg. I cut the shape out of the blank in one piece. I intended to cut the bottom off with the table saw, use a large hole saw to make the cavity of the box and use some 1/4 inch cedar for the lid. However, when I put it on the table saw I cut the top instead of the bottom. So, I cut both top and bottom and cut the cavity with the scroll saw. I like the way the lid matches the box and may do this from now on. I sanded it all with a flexible pad sander and finished it with spray poly. ... https://www.youtube.com/watch?v=FQF22TWAGrI