Used to prevent your harlot from going off when stowed with the hammer back. Completely untested, print with same settings as the rest of your harlot for best results.
Completely untested version of the Galileo that takes AR15 trigger groups.
Please support the original creators by downloading the Build Your Own Adventure from AWCY.
Contact me on:
Reddit (same username)
Twitter (CantonCustoms)
Got a M7 bayonet without grips on numrich and wanted grips on it. So I had to reverse engineer grips from online sources since nobody has made a STL of it yet. So I did it.
No printing instructions given since I normally just print with 4-6 walls and 99% infill w/ zig zag and PLA+. But it's a grip. You can get away with a lot less.
Using the feed ramps and ejector from the AWCY lower pack and the form factor of the Hoffman Super Lower (basic ver), this should give you the best of both worlds.
Sadly some features had to be removed such as the front takedown detents or bolt hold open.
(I forgot to add that you needed the hose clamp from the Hoffman readme, oops)
Note: Untested as of upload. But it shouldn't blow up on you if you assemble it correctly as it's based on the proven Hoffman lower.
CHANGELOG:
2-14-2024 Made an adjustment to the area around the mag catch so it's easier to access.
Prembleton and Sons Disconnector DXF and Step File
reverse engineered by CantoniaCustoms
Original Files- The original "open beta" contains printable stls.
BinDisco.dxf - dxf file for use with sendcutsend DO NOT PRINT THIS VERSION.
sloppysecondsknockoff.step and .sldprt - source files if you want to make your own changes. (do not print these either)
Why I released these files
Originally I wanted to respect this as an open beta and give it some time if any design changes were to be made
but given how he's been selling these disconnectors for some time now it's safe to say the design is final.
More pressingly, however, is that there is the risk of Prembleton's store potentially being a honeypot as
part of a plea agreement after his house has been raided by the ATF for construction a destructive device.
Anyways use this as a template to cut your own out from a sheet of 3mm metal (or get somebody else to do it for you)
Also remember to use this with a printed safety (avalible here as courtsey) or just file down an average AR15 safety.
Edit: Prembie has reached out to me and stated that he has not been charged and these files are under patent.
On the first point, I have no evidence regarding if he is honeypotting or really any evidence that he is not, with the only thing suggesting to me that it seems weird that he has been let off with a slap on the wrist and how he decided to start selling SS's right after the police raid (he has decided to not sell those however). I will take these files down if he can produce a patent number to me.
Zero licensing because it's not really my work
As the title says, Hoffman Basic Lower remixed with the magwell from the AWCY AR9 PPS43 lower. Included reciever pin plates but you'll need to download AWCY's pps43 ejector, mag catch and feed ramp from either their ubar lower pack or the ARK 1.0