I designed a Modular Universal handgun holster which fits most full size handguns on the market. Even with slide mounted red dot, match weight, light, or suppressor on the gun.
Gen 1 uses the HAVOC factory 0.5" long 1/4-20 set screw to mount the launcher to the top rail by friction. These set screws pushes the launcher against the top rail.
One of my customer said he doesn't think it is a safe way to attach the launcher to the stock. Thus I improved my design. Gen 2 replaces the friction mount with actual screw mount. The under side of top rail is smooth now with only 2 holes for 1/4-20 brass inserts. You will also need 2 0.75" long 1/4-20 set screws to replace the factory one.
Parts necessary for this stock:
3× M5 nuts,
1×M5×30 bolt,
1×M5×35 bolt,
1× M5×70 bolt,
1× M5 washer,
2× 1/4-20 brass inserts,
2× 0.75" long 1/4-20 set screws,
0.25"×0.25"×5.5" rod (metal or wood).
*Applies to TPU prints only
**Applies to solid TPU prints only
I don't recommend printing in TPU. Hollow ones are too flexible while solid ones takes too long (14 hours) but don't provide enough benefit. PLA ones only take 2.5 hours to print and I don't think 1 solid TPU stand is more durable than 5 PLA stands combined.
You need 4 M3 nuts and M3×14 fasteners to assemble the Molle one. You may need to file the belt clip on the belt adapter plate to fit your belt better.
This sight is basically impossible to film in a shooting range unless I use an extremely small aperture and shoot at a very close target.
I dismissed this concept as unnecessary during open box but now I think it does have some merits. Compared to a red dot, it requires no battery, zeroing, mount, nor special holster. It is also much smaller thus less prone to snag. Compared to an iron sight, it provides a clearer sight picture.
Compatible models: S&W 586, 686, 581, 681/Ruger GP100/Chiappa Rhino
You need 1 M3×20 button head screw and 1 M3 nut to assemble.
I don't have any gun other than Rhino mentioned above to test so leave comment if you encounter any compatibility issue.
May 21, 2022 Update: Evike seems to change the mold of G36 stock every time when I purchase from it so I slightly tweaked the geometry of the stock adapter. Hopefully it can fit better with G36 stocks purchased from it after May 01, 2022.
Additional pictures: https://imgur.com/a/1U1zEZV
Stand alone stock adapter for 12 inch barrel HAVOC 37mm launcher. 3D Print-able.
You need to buy an AR pistol grip of your choice (A2 or Hogue, as long as it doesn't have the thumb shaped tab on top) and a G36 stock. I highly recommend you to purchase the same stock as what I have in the picture. Yes I know G36 has more than one stock variation but I cannot guarantee the fitment.
It is available on a major airsoft retailer for around $18.
Depending on which grip you brought, the cost of the whole stock will be at $80-100. Much cheaper than the $240+ stock on market now. If you can find one available at all.
Do not use the bolt included with the AR pistol grip. Use M5×30 bolt instead.
This version only fits the 12 inch barrel launcher for now. I can work on a 7 inch barrel version if you provide me the dimensions.
Necessary Parts list: 2× double sided rail, 1× stock adapter, 3× M5 nuts, 2× M5×30 bolts, 1× M5×70 bolt, 1× M5 washer, AR-15 pistol grip, G36 stock.